AH Demag..99% finished.. - Page 2

pomz99 · 12-06-2006, 06:21 AM

Very nice.

gebirgsjager6thss · 12-06-2006, 06:28 AM

I have been waiting for someone to say "It's Too Clean!" LOL
I like 'em clean so this is a terriffic set of wheels IMHO. You did a wonderful job.
GJ

veritasz34 · 12-07-2006, 01:05 AM

Thanks everyone for the kind words. This was really a good kit to try to build. Alot of the things I did was to satisfy myself. The AH Demag kit is NOT for the true novice builder. I would only recommend it to a novice builder if they have a more experienced builder very close to them. It is for an intermediate builder. I hope this proves to those who had issues about this kit at the start that it can be built into a very nice addition to anyones 1/6 collection. I had alot of help and support on this one from alot of people, I say thanks to all of those. Again thanks for the kind words and I'm glad everyone has enjoyed..

PS I kind of like clean/light weathering on my vehicles also.. :-P

thetoysurgeon · 12-07-2006, 10:11 PM

Better late than never...I think you did a great job on it. Along with your custom items which make it turn out even better. Do the sides fold? Whats your feel on its sturdiness after its build? Way to go JOhn !

veritasz34 · 12-08-2006, 01:09 AM

Don't know if I fully understand?? Do the sides fold?? The rear lets down as shown in the pics. For those who followed my build I did do alot of additions to beef this thing up. Again my choice. Overall the final product is very sturdy but then again I used alot of 2 part epoxy to ensure added strength in certain areas..In the end the builder can have a vehicle that is as sturdy as most custom vehicles. The amount of abuse this thing will/can take depends on most things similar in this hobby. As we strive for perfect scale sometimes things get a little brittle. All in all my demag is sturdy and would have no problem bringing it to a show. No more than any of the other scratchbuilds that I have made..

Will1/6 · 02-04-2012, 02:13 AM

Nice job on the Demag!!!

Germanbilly1 · 02-04-2012, 04:26 AM

Nice Demag and nice looking build.
GB

egonzinc · 02-04-2012, 08:33 PM

Great job!
It is great to see you here again!

Eddie Acosta · 02-16-2012, 03:42 AM

Excellent workmanship and detail. You have created an awesome piece.

12-07-2006, 10:11 PM	#14
thetoysurgeon Battalion Commander Join Date: Jun 2005 Location: Anderson, SC Posts: 1,731 Images: 86	Better late than never...I think you did a great job on it. Along with your custom items which make it turn out even better. Do the sides fold? Whats your feel on its sturdiness after its build? Way to go JOhn ! __________________ "All that you are and may become, is dependent on this present company."

02-04-2012, 02:13 AM	#16
Will1/6 Machine Gunner Join Date: Apr 2011 Location: so cal Posts: 269 Images: 6	Re: AH Demag..99% finished.. Nice job on the Demag!!!

02-04-2012, 04:26 AM	#17
Germanbilly1 Battalion Commander Join Date: Jun 2005 Location: High Desert ,CA Posts: 2,258 Images: 12	Re: AH Demag..99% finished.. Nice Demag and nice looking build. GB __________________ Meine Ehre heisst Treue!

02-04-2012, 08:33 PM	#18
egonzinc Battalion Commander Join Date: Jun 2005 Location: Puerto Rico, USA Posts: 1,450	Re: AH Demag..99% finished.. Great job! It is great to see you here again! __________________ Eduardo www.egonzinc.com

02-16-2012, 03:42 AM	#19
Eddie Acosta Machine Gunner Join Date: Jul 2011 Location: Tulare, CA Posts: 236	Re: AH Demag..99% finished.. Excellent workmanship and detail. You have created an awesome piece. __________________ CPT, USA Ret. CM/AN

12-06-2006, 06:21 AM	#11
pomz99 Company Commander Join Date: Apr 2006 Location: Calgary, Canada Posts: 1,104	Very nice.

12-06-2006, 06:28 AM	#12
gebirgsjager6thss Battalion Commander Join Date: Apr 2006 Location: Farthest Point From the Bright Centre Of The Universe Posts: 1,239	I have been waiting for someone to say "It's Too Clean!" LOL I like 'em clean so this is a terriffic set of wheels IMHO. You did a wonderful job. GJ

12-07-2006, 01:05 AM	#13
veritasz34 Company Commander Join Date: Jun 2005 Location: EARTH I think.. Posts: 672	Thanks everyone for the kind words. This was really a good kit to try to build. Alot of the things I did was to satisfy myself. The AH Demag kit is NOT for the true novice builder. I would only recommend it to a novice builder if they have a more experienced builder very close to them. It is for an intermediate builder. I hope this proves to those who had issues about this kit at the start that it can be built into a very nice addition to anyones 1/6 collection. I had alot of help and support on this one from alot of people, I say thanks to all of those. Again thanks for the kind words and I'm glad everyone has enjoyed.. PS I kind of like clean/light weathering on my vehicles also.. :-P

12-08-2006, 01:09 AM	#15
veritasz34 Company Commander Join Date: Jun 2005 Location: EARTH I think.. Posts: 672	Don't know if I fully understand?? Do the sides fold?? The rear lets down as shown in the pics. For those who followed my build I did do alot of additions to beef this thing up. Again my choice. Overall the final product is very sturdy but then again I used alot of 2 part epoxy to ensure added strength in certain areas..In the end the builder can have a vehicle that is as sturdy as most custom vehicles. The amount of abuse this thing will/can take depends on most things similar in this hobby. As we strive for perfect scale sometimes things get a little brittle. All in all my demag is sturdy and would have no problem bringing it to a show. No more than any of the other scratchbuilds that I have made..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode