Panzwerk T-34 parts dimensions questions

[joeyangel]

If anyone happens to have any of Steve's T-34 running gear parts on hand. I don't trust my math, and I'd hate to get the parts only to find that I was off in my calculations. I was wondering if you might be able to provide me with the following measurements - thanks in advance for any assistance you can offer:

The length/width/height and axle diameter for the torsion bar.




The width of the standard track:




And the diameter of the road wheel itself:

[panzerwerk]

Joey , I will measure everything for you tomorrow.

[joeyangel]

Thanks, Steve, that would be awesome; I know you're busy, so whenever you can find the time. Thanks again!

[panzerwerk]

Sorry for the late reply Joey , got sidetracked with the commercial I am working on .


the wheel diameter is 138 mm

the torsion bar length is 107 mm

the diameter of round cylinder that fits into the back of the road wheel off the torsion bar is 26 mm

and the width of the track is 86 mm

[panzerwerk]

the torsion bar height as you have it marked is about 29 mm
and the width as you have it marked is 18 mm

[joeyangel]

I can't thank you enough, Steve - this measurements are extremely helpful. There is so much conflicting data out there about the T-34; knowing the size of the parts that will be going on the model helps me avoid some very frustrating mistakes.

Thanks again for taking the time out of your busy schedule to track down this information for me; I'll keep an eye on the site for when you've finished your commercial shoot and have had a chance to catch up - thanks again!