Kapernakis
Platoon Leader
I am currently working on putting together a US squad and decided on using the NLM leggings. I liked the fit but did not like the color or how they sat on the figure, as can be seen in the picture below.
[/img]
As can be seen the front seam is not centered and the lacing is not on the side (more toward the rear), plus the strap is too short and the buckle is plastic, I broke 2 trying to tighten the straps.
Here are what my modified leggings look like.
[/img]
Here is what I did.
Stock NLM on the left, My mod on right.
[img][img]http://i35.photobucket.com/albums/d189/kapernakis/IMG_1919.jpg[/img]
Basically all I did was move the buckle more to the eyelets and put on a longer strap. I used a 3/32" square buckle from Rio Rondo and .125" webbing(coyote khaki) from Good Stuff To Go.
[/img]
I then painted them with a mix of Tamiya dark yellow(XF-60), khaki(XF-49) and some white(XF-2).
Here they are compared to a real legging.
[/img]
And here they are on 2 of my figures. 2 down 10 more to go.
[/img]
As can be seen the front seam is not centered and the lacing is not on the side (more toward the rear), plus the strap is too short and the buckle is plastic, I broke 2 trying to tighten the straps.
Here are what my modified leggings look like.
Here is what I did.
Stock NLM on the left, My mod on right.
[img][img]http://i35.photobucket.com/albums/d189/kapernakis/IMG_1919.jpg[/img]
Basically all I did was move the buckle more to the eyelets and put on a longer strap. I used a 3/32" square buckle from Rio Rondo and .125" webbing(coyote khaki) from Good Stuff To Go.
I then painted them with a mix of Tamiya dark yellow(XF-60), khaki(XF-49) and some white(XF-2).
Here they are compared to a real legging.
And here they are on 2 of my figures. 2 down 10 more to go.